Setting & Installation Network in A Warnet

Setting & Installation Network in A Warnet (Warung Internet) Remember, WARNET, Not Warkop!
who have never ngeliat Warnet, this Dya picture on the left side!

Well usually the notion of setting setting up only those who have advanced in IT World, With a fairly decent set fee they are willing to assist us in building a cafe that should be we use as a Production Unit.
but I think if we have the will to do it, Why Not? Betull?
Ignorance of how a network system to run smoothly is the main reason for us to continue to use their power.
Below is a basic plan of the installation at cafe Fantasy I (Warnet imam77) internet which have 1 server & 12 clients as shown in the picture below:



Preparation of hardware and software
It should be before we carry out the installation of the network, we first prepare the hardware & software that will be connected within the scope of the network. Some preparatory steps required are:
1. PC Servers, the recommended minimum specifications:
a. Hardware:
v motherboard: 3:00 Ghz equivalent speed for dual core
v Ram: 1 Ghz
v Harddisk: 160 GB
v NIC / LAN Card: 10/100 Mbps
v Drive: DVD / CD Writer
v Other specifications: Optional

b. Software:
v Windows XP SP2
v Bandwidth Controller / Manager
v Billing System, etc.
v Anti-Virus
v Firewall
v Anti-Spyware, Malware, Adware

2. PC Client
a. Hardware:
v motherboard: agreements equivalent to 2.80 Ghz
v Ram: 512 MB
v Harddisk: 40 GHz
v VGA Card: Optional for the Game

b. Software:
v Windows XP SP2
v Browsing Tools:
1. Internet Explorer
2. Mozilla FireFox

v Chat Tools:
1. Yahoo Messenger
2. MIRC

v Online Game, Example:
1. Warcraft III
2. Ragnarok Online
3.Counter Strike

v Adobe Reader
v Anti-Virus
Winamp v
v Microsoft Office
v Billing System
v Etc


3. Hub / Switch / Router
It is a tool used to share Internet connection from a PC server to the PC Client.




4.Modem
is a device that is used as a link from a PC or network to an Internet Service Provider (Internet Service Provider / ISP).


2.3 Network Topology and Cabling

Judging from the three types of existing network topology is a ring topology, bus topology and star topology is the best and most economical use for installation at the cafe is a star topology. To implement the STAR Network Topology in the case above, the recommended installation as follows:



Caption:
Red cable: UTP / LAN that connects the switch with a PC client.
Blue Cable: The cable that connects between the switch and PC Servers.
Cable Green: The connecting cable between the PC Server with External Modem.

While the basic scheme Kable Installation of UTP on RJ-45 connector. The order of the cord is:
OP - O - HP - B - BP - H - CP - C
O = Orange, P = White, B = Blue; H = Green; C = Brown.




Checking the connection between the PC Client with the Switch can be done with the following steps:
1) By using a special tester for LAN cable. Tester is able to determine if the cable connection between the tip of one another have been installed properly or not. If you do not have the testing equipment can be done by hand which will be described in No. 2.
2) By giving the sign in Kable each end of the same color, then fitted with an adjustment of the number that exist on the client and the number listed on the Switch. Example: if one end Kable No.1 client installed on your PC then the other end should be installed on the port is also No.1 on the Switch. If the cable is connected properly then the light is contained in the switch will light. If no lamp will not light or light with not perfect. If this happens, then it should do the checking steps as follows:

a. Check if the RJ-45 connector is mounted on each port
correctly. Installation of the truth is if it is you hear a click when enter the connector.

b. Check for UTP cable / LAN hooked up to any possibility of fracture.

c. If both these steps do not resolve the problem then have to re-installation diakan RJ-45 connectors. because there is a possibility that at the time of installation of all cable connectors are not connected to the correct position.
d. If that did not solve the problem, then steps should be done
is to replace it with a new cable. Because there may exist Kable who drop in, which is caused when the wiring experiencing severe bent so that the core of one of Kable broken.


http://www.imam77.co.cc/2009/10/membuat-instalasi-jaringan-warnet.html